A+ Choice - Cellphone Accessories

	GOLDFAR TRADING INC. \|Home \| Products \| Safety Tips\| Download \| Contact us\|BOLG\| \|
	BALLISTIC\|SHELL SHOCK\|CLINGO\|OtterBox\|Invisible Shield \|Clearance \| GALLERY \|IPHONE 4\|ITOUCH 4\|IPAD\|BLACKBERRY\|LG\|SAMSUNG\|direct sale \| Cash Back A+ Choice for your Cellphone Accessories and More We are one of cellphone accessories wholesale in GTA.If you are the dealer please contact us by email: wholesale@goldfar.com 2220 Midland Ave, Unit 66BR,Scarborough, ON M1P 3E6 Tele: 416-628-5931

Unlock Instructions
How to unlock the Blackberry How to Enter Unlock Codes on BlackBerry 9700 Curve: *** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) * 1. Go to settings menu => and then Options 2. Select Advanced options => and then Sim card 3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) (IF MEP + ALT2 doesn't work, try use MEP+ALT　4 )　 5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from CellUnlock.net and press in the track wheel / jog dial to confirm 6. Your phone is now unlocked -------------------------------------------------------------------------------- Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000 Must be done without a sim card inserted & wireless radios must be turned off. Go to settings. Go to options. Go to advanced options. Go to sim card. Hold the ALT Key while typing in MEPE ( not case sensitive ) ( you will not see text appear on screen while typing ). It will say "Enter Network MEP Code, then you type in the unlock code, press in the trackball to confirm. Your phone is now unlocked. Storm, 9500, 9530 sim card must be inserted and wireless radios must be turned off (no check marks). Go to options. Go to advanced options. Go to sim card (it will show number). Hit menu button then select show keyboard turn to landscape full type key board. Type MEPD (You will not be able to see letters on screen that you type). Type MEP2. Now it will say enter network mep code. Enter the unlock code you were given and then hit the Enter button. How to Enter Unlock Codes on BlackBerry 8800 8300 Curve: * You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) * 1. Go to settings menu => and then Options 2. Select Advanced options => and then Sim card 3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) 5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from CellUnlock.net and press in the track wheel / jog dial to confirm 6. Your phone is now unlocked -------------------------------------------------------------------------------- Blackberry 8100 Unlock Code Entry Instructions How to Enter Unlock Codes on BlackBerry 8100 Pearl: Step Action 1 Insert SIM into device 2 Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT. 3 Select "Options" THEN SELECT ADVANCED OPTIONS 4 Scroll down and select "SIM Card" 5 Type "MEPPD" (please note that you will not see what you type on the screen) 6 Type "MEPP then [ALT BUTTON] then 2" (please note that you will not see what you type on the screen) 7 Enter the Unlock Code 8 Press enter 9 Reboot device. Device is now unlocked. -------------------------------------------------------------------------------- Blackberry 8700 Unlock Code Entry Instructions How to Enter Unlock Codes on BlackBerry 8700: * You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! * go to settings go to options go to advanced options go to sim card Type MEPD (not case sensitive) (you will not see text appear on screen while typing) Does it say Network active? if so your phone is locked Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing) It will say "Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm. Your phone is now unlocked -------------------------------------------------------------------------------- BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions** How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Select Options menu on BB. Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code) Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'. Usually u should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.) Here you must enter the "NET Unlock Code" that we gave you.
Treo 680,650 600 Unlock Code Entry Instructions How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones Remove Treo battery, Insert incorrect SIM card (Any simcard that the phone does not accept) Power on Treo-650, 'Sim not allowed' is displayed, click OK Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion: ##(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software) For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows: ##12345678# , then press dial Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by us. Phone will reset and display sim lock removed -------------------------------------------------------------------------------- TREO 750 Unlock Code Entry Instructions How to Enter Unlock Codes on the Treo 750 1)Insert NON-Cingular Sim card in the phone 2)The phone will ask for the Unlock Code 3)Please use your Stylus and choose the little Keyboard Icon on the bottom middle of the screen 4)Enter the code on the digital keyboard that appears on the screen 5)Then click again on the little keyboard Icon at the bottom middle 6) Click OK 7)Your phone is now unlocked If you see a message that says "Timeout" just leave the phone on with that screen and the message will dissapear after a while and prompt you for the unlock code again
HP iPaq Unlock Code Entry Instructions How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc) Step Action 1 Insert NON Cingular SIM into device 2 Power on the device - Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code) 3 Enter the unlock code in the blank field 4 Press Ok - If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information) - If the unlock code is correct, a success dialog will appear. 5 Press Ok - The device is now unlocked and should continue booting OR On the Today screen, tap Start > Settings. Tap the Phone Band icon. Tap the Keyboard icon to open the virtual keyboard Tap Shift and then Ctl key to enable the keys. Tap the blank area below the band selection box to open the unlock tool. Tap Shift and then Ctl to disable the keys. Enter the 8-digit unlock code and tap OK when done. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens: Unlock successful. Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts. Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
Sony-Ericsson Unlock Code Entry Instructions How to Enter Unlock Codes on Sony-Ericsson Cell Phones Switch ON your phone without Sim card Press 1 time the left arrow Press 2 times the button * Press 1 time the left arrow 'Personalize with MNC2' will appear You can now enter your unlock code If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.
Motorola Subsidy Unlock Code Entry Instructions How to Enter Subsidy/Unlock Codes on Motorola Cell Phones Switch ON your phone with a not allowed Sim card (one that didn't come with the phone) the phone show 'Enter Special Code' or 'Enter Subsidy Code' and you can now enter your unlock code Note: If you get the prompt "Contact Service Provider" or "Phone Blocked" , please leave your phone on at that prompt for upto 8 hours. This will reset the phone's internal timer and automatically change the prompt to "Enter Subsidy Code" , at which point you should enter the unlock codes exactly as provided.
How to Enter Unlock Codes on Nokia Phones Most of Nokia and BB5 For Most Nokia BB5 Models -- You only have 3 attempts, be carefull You must enter the following formula #pw+(code)+z#** # - is standard # key p - press the * key until it changes to a p w - press the * key until it changes to a w + - press the * key until it changes to a + z - is the final digit - either 7, 1, 3 or 5 code - you will recieve a code that looks like: 837593759803117 Enter the formular #pw+code+ < at this point, for BB5 try the 7 first, if not good then do 1 and finally try the 3, but if all fails your phone will be HARDLOCKED> Under 80% of situations, the code to enter would either be the one ending in +7, if not try +1, then +3 Nokia BB5 - E62 For Nokia E62 -- You only have 3 attempts, be carefull You must enter the following formula #pwi(code)iz# # - is standard # key p - press the p w - press the w i - press the i z - is the final digit - either 7, 1, 3 or 5 code - you will recieve a code that looks like: 837593759803117 How to Enter Unlock Codes on Sidekick/Hiptop Cell Phones (all models):** 1. Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code. 2. The box will say: Title: Special Code Required Dialog: Enter code to enable SIM Box for Code: 1-8 digits Options: Enable or Cancel 3. In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It’s unlocked. Enjoy. In case you see the “Waiting for Activation Screen”, hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
Samsung: Samsung I616 Switch on your phone with it's original Fido or Rogers SIM card #7465625638 Code windows will come up and input the code and ok It's done. (Some said need non original SIM card) Other Switch ON your phone without SIM Card Phone will ask for Password - enter your code here If phone says "Insert correct sim" enter: #0111CODE# For Most A series Models (a516, a707) and 3G, Zxxx & Dxxx Power on the phone - with NO SIM CARD Type in: #7465625638code# For Samsung Z series Switch ON your phone without SIM Card Compose : **CODE#
LG Unlock Code Entry Instructions For MOST LG Models With the phone in standby, enter 2945#7101# this will activate the extra menu Goto: Settings>Security>SimLock>Network select deactivate this is where you can enter your code, press accept For NEW LG 3G Models (TU500) Insert an Invalid SimCard When invalid smartcard appears enter 159753## On the next screen enter your unlock code than press OK LG Shine TU720 Rogers 1. Insert the original network SIM 2. Enter #865625#. Enter the unlocking code. Press OK. 6. It should give you the message Success. How to Enter Unlock Codes On LG Mobile Phones Step Action 1 Insert non-Cingular SIM card 2 Power on the handset - phone will display "phone restricted" 3 Select "Cancel" - phone will display "phone restriction code" 4 Enter the SIM Unlock code 5 Select "OK" - the handset is now successfully unlocked Model : LG F2250 With orange sim card in the start menu tape : 2945#3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK. Model : LG U8110 With a not allowed sim card in your phone enter Pin code then validate tape : 277634##, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked. Model : LG U8210 With a not allowed sim card enter Pin code then validate tape : 277634##, now you show test menu choose Sim test menu and tape : 2945##, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK. Model : LG U8150 Switch ON your phone with a not allowed Sim card, compose : 277634##, go to menu 'Sim Lock' and enter your unlock code. Model : All Others Switch ON your phone with an allowed sim card and compose : 2945#5101# - LG 510w 1945#5101# - LG 1200 & B1200 2945#5221# - LG 5200 & 52200 2945#5301# - LG 5300 2945#5401# - LG 5400 2945#70001# - LG 7020 2945#7101# - LG 7100 2945#1201# - LG 1100 & 1300 2945#70001# - LG 7250T & 1100 2945#2201# - LG C2200 2945#5301# - LG T5100 2945#3311# - C3310 Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code. -------------------------------------------------------------------------------- LG CU-500 Unlock Code Entry Instructions How-To Enter Unlock Codes on LG CU500 mobile phones: Insert a non-Cingular SIM card into your LG CU 500 and power on your phone When you get the invalid sim-card message/prompt, enter 159753## on your phones keypad On the next screen enter the unlock code provided than press OK.
HTC Unlocking Method *For MOST HTC Models and Cingular 8xxx series PDA phones Insert an Invalid SimCard When invalid smartcard appears enter your unlock code than press OK

Bold, Curve, 8300, 8310, 8320, 8800, 8820, 9000

Storm, 9500, 9530